"Applicability Statement for the Routing Protocol for Low Power and Lossy...
2013-07-18, rev -07: This document discusses the applicability of RPL in Advanced Metering Infrastructure (AMI) networks.
View Article"Applicability Statement: The use of the RPL protocol set in Home Automation...
2013-08-17, rev -01: The purpose of this document is to provide guidance in the selection and use of RPL protocols to implement the features required in building and home environments.
View Article"Multicast Protocol for Low power and Lossy Networks (MPL)" - Jonathan Hui,...
2013-08-29, rev -05: This document specifies the Multicast Protocol for Low power and Lossy Networks (MPL) that provides IPv6 multicast forwarding in constrained networks. MPL avoids the need to...
View Article"ROLL Applicability Statement Template" - Michael Richardson
2013-09-17, rev -03: This document is a template applicability statement for the Routing over Low-power and Lossy Networks (ROLL) WG. This document is not for publication, but rather is to be used as a...
View Article"Terms used in Routing for Low power And Lossy Networks" - JP Vasseur
2013-10-02, rev -13: The documents provides a glossary of terminology used in routing requirements and solutions for networks referred to as Low power and Lossy Networks (LLN). An LLN is typically...
View Article"RPL applicability in industrial networks" - Tom Phinney, Pascal Thubert,...
2013-10-21, rev -02: The wide deployment of wireless devices, with their low installed cost (compared to wired devices), will significantly improve the productivity and safety of industrial plants. It...
View Article"A Security Threat Analysis for Routing over Low-Power and Lossy Networks" -...
2013-10-21, rev -05: This document presents a security threat analysis for routing over low-power and lossy networks (LLN). The development builds upon previous work on routing security and adapts the...
View Article"A Security Threat Analysis for Routing Protocol for Low-power and lossy...
2013-12-15, rev -06: This document presents a security threat analysis for the Routing Protocol for Low-power and lossy networks (RPL, ROLL). The development builds upon previous work on routing...
View Article"ROLL Applicability Statement Template" - Michael Richardson
2014-01-25, rev -04: This document is a template applicability statement for the Routing over Low-power and Lossy Networks (ROLL) WG. This document is not for publication, but rather is to be used as a...
View Article"Applicability Statement: The use of the RPL protocol set in Home Automation...
2014-02-13, rev -02: The purpose of this document is to provide guidance in the selection and use of RPL protocols to implement the features required for control in building and home environments.
View Article"Multicast Protocol for Low power and Lossy Networks (MPL)" - Jonathan Hui,...
2014-02-14, rev -07: This document specifies the Multicast Protocol for Low power and Lossy Networks (MPL) that provides IPv6 multicast forwarding in constrained networks. MPL avoids the need to...
View Article"Applicability Statement for the Routing Protocol for Low Power and Lossy...
2014-02-14, rev -08: This document discusses the applicability of RPL in Advanced Metering Infrastructure (AMI) networks.
View Article"MPL Parameter Configuration Option for DHCPv6" - Yusuke Doi, Matthew Gillmore
2014-03-13, rev -00: This draft defines a way to configure MPL parameter set via DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a...
View Article"MPL forwarder policy for multicast with admin-local scope" - Peter Van der Stok
2014-02-14, rev -00: The purpose of this document is to specify a policy for the routing of mmulticast messages with admin-local scope.
View Article"Multicast Protocol for Low power and Lossy Networks (MPL)" - Jonathan Hui,...
2014-03-28, rev -08: This document specifies the Multicast Protocol for Low power and Lossy Networks (MPL) that provides IPv6 multicast forwarding in constrained networks. MPL avoids the need to...
View Article"MPL forwarder policy for multicast with admin-local scope" - Peter Van der...
2014-04-08, rev -00: The purpose of this document is to specify an automated policy for the routing of MPL multicast messages with admin-local scope in a border router.
View Article"Multicast Protocol for Low power and Lossy Networks (MPL)" - Jonathan Hui,...
2014-04-14, rev -09: This document specifies the Multicast Protocol for Low power and Lossy Networks (MPL) that provides IPv6 multicast forwarding in constrained networks. MPL avoids the need to...
View Article"ROLL Applicability Statement Template" - Michael Richardson
2014-05-08, rev -05: This document is a template applicability statement for the Routing over Low-power and Lossy Networks (ROLL) WG. This document is not for publication, but rather is to be used as a...
View Article"Applicability Statement: The use of the RPL protocol set in Home Automation...
2014-05-12, rev -03: The purpose of this document is to provide guidance in the selection and use of RPL protocols to implement the features required for control in building and home environments.
View Article"A Security Threat Analysis for Routing Protocol for Low-power and lossy...
2014-06-10, rev -07: This document presents a security threat analysis for the Routing Protocol for Low-power and lossy networks (RPL, ROLL). The development builds upon previous work on routing...
View Article
